Faculty of Chemistry and Chemical Engineering
MAJOR FACILITIES AT THE FACULTY
WELCOME TO THE STUDY OF CHEMISTRY AND CHEMICAL ENGINEERING
Study programs of the FKKT of the University of Maribor
TUTORS
VISION
MISSION
The Faculty’s mission is to nurture creativity and excellence in the implementation of educational, research, professional and international activities on the basis of ethical principles and academic freedom. In accordance with the University of Maribor, the Faculty has also made it its mission to “care for human beings and sustainable development, to enrich the treasury of knowledge, to raise the level of awareness, and to strengthen humanistic values, the culture of dialogue, the quality of living and global justice.”
STUDY LITERATURE
Erasmus
ACTIVITIES
LABORATORY EXCERCISES
Laboratory exercises are mainly carried out in the laboratories in Building D. In the exercises, students are assigned to groups; the assignment will be published for each course. All information on group assignments, the laboratory where the exercises will be carried out and specific requirements will be provided by the professors or assistants of each course. In the first year, laboratory exercises are carried out in the following subjects: General Chemistry, Physics II (the so-called Physics Practicum) and Analytical Chemistry I. The term 'laboratory exercises' is sometimes also used to refer to exercises carried out in the computer room in the subjects Computer Science in Chemistry, Process Balance, Chemical Calculus and Process Calculus I and II. Required protective equipment in the laboratories: lab coat, goggles and gloves (nitrile gloves (purple, blue) are recommended, but latex gloves (white, beige) are also suitable). For the laboratory exercises, you will also need a pipetting attachment (also called a pipetting ball or propipette). Students should purchase this equipment themselves from the relevant shops, e.g. Sanolabor in the City shopping centre (map) or Europark (map).
LUCTURES AND TIMETABLE
The timetable of lectures and tutorials is published on the Timetables page. Most lectures are held in Building A. Breaks are not marked on the timetable for clarity. School lessons last 45 minutes, followed by a 15-minute break (or by arrangement). You may have noticed PR, SV, RV or LV next to the name of the course in the timetable. PR - lectures: In the lessons, you cover the theory of the subject, supported by examples. SV - Seminar exercises: In the lessons you solve e.g. calculus problems. RV - computer exercises: In the lessons, you learn about computer programs and use them to solve problems. Participation in the computer exercises is compulsory. LV - laboratory exercises: These lessons are experimental work in the laboratory. Participation in laboratory exercises is compulsory and appropriate protective equipment is required (see section Laboratory exercises).
LIBRARY
Library of technical faculties: [https://ktfmb.um.si/](https://ktfmb.um.si/) Maribor University Library: [https://ukm.um.si/splo-ne-informacije](https://ukm.um.si/splo-ne-informacije)
Freshman, welcome to the Faculty of Chemistry and Chemical Engineering!
WHERE TO FIND US
TPO & AED
PRESENTATION FCCE
STUDENT AFFAIRS OFFICE - office hours and contacts
STUDENT MEALS
All the information about student meals ("vouchers") can be found here. [https://www.studentska-prehrana.si/](https://www.studentska-prehrana.si/) Once you have made all the necessary arrangements to benefit from the subsidy, you can use it as follows: Visit a restaurant or café that offers the subsidy (list of cafés). [https://www.studentska-prehrana.si/sl/restaurant](https://www.studentska-prehrana.si/sl/restaurant) Order the food you want. Let the caterer know that you will benefit from the subsidy (tell him/her that you will "eat on voucher"). When you order or pay (depending on the restaurant), the caterer will bring you a terminal on which you can either put your mobile phone (on which you have previously dialled 1808) or a contactless card. The subsidy is approved. You pay the difference at the restaurant.
THE STUDENTS' ASSOCIATION 'CHEMIST'
DICTIONARY OF CHEMISTRY
THE STUDENTS' ASSOCIATION 'CHEMIST'
The Scientific - Research and Pedagogical Association of Students of the Faculty of Chemistry and Chemical Engineerinh Chemist (Slovenian: Kemik) of the University of Maribor (hereinafter referred to as the KEMIK Association) is an independent, voluntary, non-profit and apolitical association of natural persons.
Lecture room A-107
Chemist and chemical engineer
Eat Smart Restaurant
LABORATORY OF SEPARATION PROCESSES AND PRODUCT DESIGN - RESEARCH ACTIVITY
Determination of basic thermodynamic and transport properties of system, which are required for process design including experimental determination of phase equilibria, mass transfer study and modelling by the use of thermodynamic and empirical models.Design and optimization of conventioanl and high pressure processes such as:- Extraction and adsorption processes for isolation and concentration of active ingredients from natural materials; in vitro and in vivo testings of antimicrobial and antioxidative activities of extracts from natural materials. - Enzyme catalyzed reactions and development of new synthesis paths by the use of high pressure reactors. - Development of new processes for syhesis and nanostructured materials for immobilization of biological compounds. - Materials processing, production of micro and nanostructured materials by PGSSTM process, and aerogels for development of new hightech products. - Analytical and preparative chromatography using supercritical fluids. - Transfer of processes into industrial scale.
WELCOME TO STUDY CHEMISTRY AND CHEMICAL ENGINEERING
EXERSCISES AT WORK
LABORATORY OF SEPARATION PROCESSES AND PRODUCT DESIGN
COOPERATION WITH UNIVERSITIES AND OTHER INSTITUTIONS
ORGANISING INTERNATIONAL MEETINGS
LABORATORY OF SEPARATION PROCESSES AND PRODUCT DESIGN
RESEARCH ACTIVITY Determination of basic thermodynamic and transport properties of system, which are required for process design including experimental determination of phase equilibria, mass transfer study and modelling by the use of thermodynamic and empirical models.Design and optimization of conventioanl and high pressure processes such as: - Extraction and adsorption processes for isolation and concentration of active ingredients from natural materials; in vitro and in vivo testings of antimicrobial and antioxidative activities of extracts from natural materials. - Enzyme catalyzed reactions and development of new synthesis paths by the use of high pressure reactors. - Development of new processes for syhesis and nanostructured materials for immobilization of biological compounds. - Materials processing, production of micro and nanostructured materials by PGSSTM process, and aerogels for development of new hightech products. - Analytical and preparative chromatography using supercritical fluids. - Transfer of processes into industrial scale.
COOPERATION WITH INDUSTRIES AND COMPANIES
Kemijska industrija Helios TBLUS d.o.o., Domžale, SI Isokon d.o.o., Slovenske Konjice, SI Belinka Belles, d.o.o., Ljubljana, SI Farmacevtska industrija Krka d.d., Novo Mesto, SI Lek d. d., Ljubljana, SI Mariborske Lekarne, Maribor, SI Prehrambena industrija Vitiva, d.o.o., Markovci, SI Inštitut za okolje in prostor, Celje, SI Hmezad exim d. d., Žalec, SI Frutarom Etol d.d., Celje, SI Hlebček d.o.o., Pragersko, SI Kozmetična industrija Afrodita d.o.o., Rogaška Slatina, SI
LECTURE ROOM A – 105
LABORATORY FOR ORGANIC AND POLYMER CHEMISTRY AND TECHNOLOGY
Research fields Functional polymers generated with hierarchical porosity Synthesis of new functional polymers in heterogeneous media - suspension, high internal phase emulsion. Photopolymerization with a chain growth mechanism and thiol-ene click polymerization. Using metathesis ring opening polymerization (Romp) for preparation of cross-linked polyolefin structures. Creating hierarchical porosity by post polymerization processes - hipercrosslinking Polymer icreactors and carriers, combinatorial chemistry Preparation of novel particulate and monolithic polymers for synthetic and analytical chemistry, combinatorial chemistry, chromatography Characterisations of new polymers by SEM, FTIR, porosimetry /Synthetic organic chemistry by the use of solid polymerics upports Biodegradable and biocompatible polymers Synthesis of porous polymers based on polysaccharides and acrylates prepared by thiol-ene chemistry for tissue engineering and tissue culture. Synthesis of porous cross linked polymers based on acrylamide, hydroxyethyl methacrylate and acrylic acid. Polymeric porous membranes Study of mechanisms of formation of various asymetric porousme mbranes prepared by wet phase inversion Applications in the field of separation: medicine (artificial kidneys, blood oxygenation), drinking water, biotechnology, pharmaceuticals… Chemical modifications of surface Porous polymeric membranes from high internal phase emulsions.
LABORATORY FOR CORROSION RESEARCH
D1-209
LABORATORY FOR THE IMPLEMENTATION OF EXERCISES: THE LABORATORY OF GENERAL CHEMISTRY AND ORGANIC CHEMISTRY
D1 – 205
LABORATORY OF REACTION ENGINEERING
D1 -204
LABORATORY OF MATERIALS
D1-212
LABORATORY OF PHYSICAL CHEMISTRY AND CHEMICAL THERMODYNAMICS
LABORATORY OF PHYSICAL CHEMISTRY AND CHEMICAL THERMODYNAMICS
RESEARCH FIELDS represents molecular modeling and computer simulation of chemical carcinogenesis and microwave chemistry with rational drug design include the study of kinetics and reaction’s mechanisms on the corroded metal surfaces in the systems, which have not been studied yet. Researches are focused on: chemical resistant steels in model solutions of aggressive media inhibitors of corrosion processes with the surfactant use the use of green surfactants protective coatings on metals corrosion at high temperatures and pressures corrosion of alluminium Measurements are performed with the potentiodynamic method, instruments measuring electrochemical noise and electrochemical impedance spectroscopy.
D2 – 303 Laboratorij za regulacije
LABORATORY for Process Systems Engineering and Sustainable Development [www.fkkt.um.si/sl/Lab/psttr.htm](http://www.fkkt.um.si/sl/Lab/psttr.htm) The laboratory's research focuses on integrated product and process design, from the selection of sustainable raw materials, reaction pathways and manufacturing processes to products with desired properties. We apply a holistic process-systems approach, incorporating sustainable development, care for environment and the principles of the circular economy.
D1-312
LABORATORY OF INORGANIC CHEMISTRY RESEARCH ACTIVITY Synthesis of inorganic compounds by sonochemical reactions Synthesis of inorganic compounds by mechanochemical reactions Synthesis of magnetic inorganic nanoparticles using a reverse micelle technique, mechanochemical synthesis, sonochemical and sol-gel synthesis Synthesis of magnetite and maghemite magnetic nanoparticles for applications in forward osmosis Synthesis and characterisation of transition metals and lanthanide coordination compounds with N-donor ligands and sulfur containing ligands Synthesis and characterisation of lanthanide coordination compounds Synthesis and characterisation of coordination compounds with sulfur-containig ligands Corrosion of biocompatible materials in simulated body fluids Obetavne raziskave za zdravljenje raka: Mariborski raziskovalci pridobili najsodobnejšo opremo za raziskave magnetne hipertermije, celoten članek v časopisu Delo: [https://www.delo.si/novice/znanoteh/obetavne-raziskave-za-zdravljenje-raka/](https://www.delo.si/novice/znanoteh/obetavne-raziskave-za-zdravljenje-raka/)
DEAN'S OFFICE
PRINCIPAL SECRETARY OF THE FACULTY
LABORATORY IS HOSTED IN THE BUILDING NEXT TO FACULTIES
RESEARCH FIELDS Efficient energy use Energy (production, co-production, distribution Alternative energy sources Environmental energy management Synthetic fuels production Biomass Torrefaction Revitalisation and/or energy exploitation of solid wastes
D1 – 413, 414 Computer room
GROUP FOR MATHEMATICS
RESEARCH FIELDS The group's research interests include mathematical modelling of hydrocarbon molecules using graph theory. In this model we calculate some topological indices, for example Wiener's index, which are related to physico-chemical properties of the molecules under study. Central area of research is cyclic aromatic hydrocarbons and their resonance or Kekule structures. The focus of research are aromatic molecules called carbonsnanotubes. In continuum theory, which represents a broad field within topology, inverse limits represent one of the most important apparatuses for their study. In the last decade the concept of inverse limits of inverse sequences has been introduced with upward semi-continuous constraint mappings. Current research focuses on the latter and the study of their properties.
LABORATORY IS HOSTED AT FACULTY OF MEDICINE, UM LABORATORY FOR BIOCHEMISTRY, MOLECULAR BIOLOGY AND GENOMICS
RESEARCH FIELDS Our research is in the fields of biochemistry, molecular biology, molecular genetics, population genetics, genomics, pharmacogenomics, systems biology/biomedicine and bioinformatics. We used state of art technology in human genome research for understanding molecular mechanisms and discovery of biomarkers for common complex diseases including inflammatory bowel diseases, Crohn disease, asthma, cancer, cardiovascular diseases, diabetes etc.Goals of our research Genetic risk factors (susceptibility to complex diseases) Molecular mechanisms of disease pathogenesis Molecular targets for development of new generation of biological drugs Molecular diagnostics including diseases subtypes Prognostic factors for disease development Corellations between treatment response and genetic predisposition (pharmacogenetics and pharmacogenomics) for personalized medicine to maximize treatment efficiency and avoid adverse drug reactions Identification of genetic susceptibility to complex disease and treatment response Development of biobanks with integrated bioinformatic tools for discovery of genotype/phenotype corellations Development of high throughput, reliable and cost effective genotyping including high resolution melting curve analysis Development of applications for quantitative gene expression using Real time PCR and for determination of global gene expression profiles using microarrays (biochips) Indentification of genetic susceptibility to complex diseases and disease clinical features using Single nucleotide polymorphisms (SNP) and haplotype analysis Discovery of most efficient genetic and gene expression profiles as disease prognostic and diagnostic biomarkers Collaboration with clinical institutions for knowledge transfer into clinical practice for the benefit of the patients.
LABORATORY IS HOSTED AT INST. JOŽEF STEFAN, KEK JAPAN and CERN SWITZERLAND GROUP FOR EXPERIMENTAL PHYSICS
RESEARCH FIELD Experimental Particle Physics: Measurements and physical analysis of measured data Research and construction of detectors for particle physics experiments Development of computational tools for the data-taking and physical analysis of measured data Application of developed detection methods in the fields of environmental and medical physics, and military research.
The optical cell 7000 bar
The optical cell is designed to study fundamental and transport properties at ultra-high pressures. Operating pressure 7000 bar, operating temperature 200 °C, V=12,6 mL
Hand pump for pressures up to 7000 bar.
Celica 2500 bar
The optical cell is designed to study study fundamental and transport properties at ultra-high pressures. Operating pressure 2500 bar, operating temperature 300 °C, V=12 mL
Celica 1000 bar
The optical cell is designed to study study fundamental and transport properties at ultra-high pressures. Operating pressure 1000 bar, operating temperature 180 °C, V=25 mL
FT-NIR
The MATRIX-F FT-NIR spectrometer is designed for real-time monitoring of laboratory and industrial processes. It can be equipped with a probe for contact measurements or with a measuring head for non-contact measurements. Thanks to the optical fibre, the spectrometer can be placed hundreds of metres away from the point of analysis. The option of an integrated computer ensures a fully autonomous analyser
Magnetic suspension balance (MSB-RUBOTHERM)
The MSB allows the gravimetric measurement (with an uncertainty uc = 10 µg) of the quantity of gas dissolved in the polymer, over a wide range of temperatures and pressures
The optical cell with six sapphire windows
The optical cell is designed to study fundamental and transport properties at high pressures. Sapphire windows allows you to see into the cell from different angles Operating pressure 500 bar, operating temperature 150 °C, V=500 mL
D1-313 Laboratory for Bioreaction Engineering
The Bioreaction Engineering Laboratory performs chemical and biochemical reactions in different types of reactors. We synthesize chemical and biochemical catalysts, characterize them in detail and test their activity and efficiency. We carry out calorimetric studies to perform safety analysis of the chemical process.
PLANETARY MICROMLIN FRITSCH PULVERISETTE 7 PREMIUM LINE
The planetary micro mill, "PULVERISETTE 7 premium line" (ball mill), is universally applicable for rapid dry and/or wet grinding of inorganic and/or organic samples for analysis, synthesis, quality control or material investigation. During synthesis, the planetary micro mill is used for mixing and homogenizing dry samples, emulsions or suspensions. The source material is crushed and/or ground with the help of balls in the grinding bowl. The material being ground is affected by centrifugal forces due to the rotation of the grinding container around its own axis and due to the support plate.
TUBE FURNACES TYPE CARBOLITE FURNACES CTF
Tube furnaces of the Carbolite Furnaces CTF type are widely used for various thermal processes such as tempering, annealing, drying, synthesis of materials and other thermal treatments. These furnaces are designed to allow precise temperature control within the tubes, which is critical in many applications such as research, industrial processes and laboratory work.
Tube furnaces of the Carbolite Furnaces CTF type
Tube furnaces of the Carbolite Furnaces CTF type are widely used for various thermal processes such as tempering, annealing, drying, synthesis of materials and other thermal treatments. These furnaces are designed to allow precise temperature control within the tubes, which is critical in many applications such as research, industrial processes and laboratory work.
GLOVE BOX
An inert atmosphere chamber, also called a glove box, is used to manipulate substances in an environment that does not contain oxygen, moisture or other contaminants. This environment makes it possible to work with sensitive materials such as air-sensitive compounds or materials that are sensitive to moisture. The user enters the chamber through the gloves that are part of the system, which allows manipulation of the materials inside the chamber without contamination or reaction with oxygen or moisture from the environment.
THERMOGRAVIMETRIC ANALYZER - TGA/SDTA 851e AND TGA2, METTLER TOLEDO
A thermogravimetric analyzer is used for thermogravimetric analysis of a material, which measures the change in weight of a sample during heating, cooling or at a constant temperature. Its main use is the characterization of materials according to their composition. Applications include plastic materials, elastomers, thermosetting compounds, mineral compounds and ceramics, as well as a wide range of analyzes in the chemical and pharmaceutical industries.
DIFFERENTIAL DYNAMIC CALORIMETER- DSC3, METTLER TOLEDO
A differential dynamic calorimeter is used for a thermal analysis technique called differential dynamic calorimetry (DSC). The differential dynamic calorimeter measures the enthalpy changes of samples due to changes in their physical and chemical properties as a function of temperature or time.
LASER PARTICLE SIZE MEASUREMENT SYSTEM - DLS, ZETASIZER NANOSERIES, MALVERN
A laser particle size measurement system is used to determine the size of particles in solutions or dispersions. Using this procedure, we can analyze the motion of particles due to Brownian motion and calculate their hydrodynamic size from this. DLS is widely used in various disciplines such as chemistry, biology, pharmacy, and material science to study the size and distribution of particles in various systems.
MICROWAVE OVEN, CEM DISCOVER SP
The CEM Discover SP microwave oven is mainly used for quick and efficient synthesis of organic compounds and the preparation of various materials in chemistry. The oven enables synthesis at high temperatures and pressures, which enables faster reactions and improves yield. It is also used in laboratory and industrial environments for research and development of new compounds, analysis of materials and preparation of samples for various applications in chemistry and related disciplines.
JFTIR Shimadzu IRAffinity - 1 spectrophotometer
The FTIR Shimadzu IRAffinity-1 provides high quality analysis in the mid-IR range (MID: 4000-650 cm-1) and far-IR range (FAR: 700-300 cm-1) in transmission (KBr tablets) or attenuated total reflection (ATR). FTIR spectroscopy is very useful for the accurate and reliable determination of the structure and composition of various substances in a wide range of applications, including chemistry, pharmaceutics, materials, biotechnology and environmental sciences. It allows rapid, sensitive and non-destructive analysis of samples.
Line electron microscope - SEM A
Line electron microscope - SEM A scanning electron microscope (SEM) is a type of microscope that creates images by scanning the surface of a sample with a focused beam of electrons. Electrons interact with atoms in the sample and create signals that convey information about the topography and composition of the sample's surface. SEMs are used in a variety of fields, including materials science, biology, and geology, to study the surface structure and composition of a wide range of materials.
Micromeritics Tristar II 3020 porosimeter
The Tristar II 3020 provides high quality surface and porosity measurements on solid materials using gas adsorption techniques. The TriStar II is a fully automated, three-station analyser that can increase the speed and efficiency of quality control analyses, with accuracy, resolution and data reduction to meet most research requirements. Its speed and accuracy make it the ideal instrument for a wide range of applications including pharmaceuticals, catalysts, carbon, cosmetics, paints, pigments, geoscience, fuel cells, high-tech ceramics and much more. The instrument has a krypton option that allows measurements in the very low surface area range.
Micromeritics AccuPyc II 1340 Helium pycnometer
The gas pycnometer measures the true, absolute and skeletal densities of powdered solids. The device works on the basis of the gas law, using inert gases such as helium, nitrogen or air as the displacement medium. In our case, the volume of the sample is determined by the change in pressure of He in a cell of a given volume. From the mass data (weighing), the pycnometer calculates the true density.
Micromeritics GeoPyc 1365 density meter
The GeoPyc density meter automatically determines the volume and density of a solid sample. During analysis, the volume of a fine, dry, liquid powder with a high flow rate, called DryFlo, is measured first. The sample is then immersed in the DryFlo medium and the volume of the sample is measured on a displacement basis. Since DryFlo takes into account the surface irregularities of the material, achieves a tight packing around the sample under investigation and does not enter the smallest pores (with entrance diameters smaller than about 25 microns), we can measure the volume, density and porosity of irregularly shaped samples or even multiple pieces. The analysis is fast and quiet, and non-destructive for the sample.
PerkinElmer CHNS 2400 SERIES II SYSTEM Elemental Analyser
The PerkinElmer® 2400 Series II CHNS/O Elemental Analyser (2400 Series II) is a proven instrument for the rapid determination of the mass fractions of carbon, hydrogen, nitrogen and sulphur in organic and other types of solid materials. The instrument also offers the option of oxygen determination. It has the capability to process a wide variety of sample types in the fields of pharmaceuticals, polymers, chemicals, environment and energy. The analysis is based on the classical Pregl Dumas method, where samples are burned in a pure oxygen atmosphere, producing combustion gases which are measured in an automated way.
Nuclear magnetic resonance - NMR
NMR spectroscopy is a versatile and non-destructive analytical method that provides detailed information on the chemical structure, composition and dynamics of a wide range of solid and liquid samples, making it a valuable tool in scientific research and a variety of applications. Its use can be found, for example, in studies of pharmaceuticals to determine the structure of drug molecules in solid form and their interaction with excipients. NMR spectroscopy in solids is also one of the most powerful tools for the study of nanoporous materials.
Laboratory of process control
In this laboratory, during exercises, students learn about process control on demonstration devices for the five most important quantities in the chemical industry, namely control of: i) temperature, ii) pressure, iii) flow, iv) fluid level and v) fluid pH
RIUM project
The most recent acquisition as part of the RIUM project is two systems for microreaction systems. These allow entire processes to be realized "on a small scale". The main advantage of microreactor systems over the classic approach is that the heat, pressure, and material gradients are reduced. The device has a modular design so that modules can be connected in different sequences, which can differ significantly from one another. We also offer modules for photo- and electrochemistry, columns, and membrane separations.
An atomic force microscope (AFM) - MFP 3D Origin Plus (Asylum/Oxford Instruments)
An atomic force microscope (AFM) enables the study of topography in atomic resolution and the study of interactions between the AFM tip and the atoms of the sample. It is useful for studying both conductive and non-conductive materials.
Multi-channel potentiostat/galvanostat/impedance analyzer MultiPalmSens4 (PalmSens)
MultiPalmSens4 is a multi-channel potentiostat/galvanostat with impedance analyzer, consisting of 5 independent PalmSens4 potentiostats. All independent channels allow selection of 9 current ranges from 100 pA to 10 mA and have a potential range of ±10 V. Electrochemical impedance spectroscopy measurements with a maximum frequency of 1 MHz can be performed with each independent channel.
Ultrapure water system PURELAB FLEX 3 (ELGA LabWater)
PURELAB FLEX 3 is a system for the production of ultrapure water (resistivity 18.2 MΩ·cm), where purification technology and water quality control enable high quality. It has a built-in 7 L tank for storing ultrapure water. In addition, PURELAB FLEX 3 enables flexible dosing of ultrapure water.
Gas chromatograph with thermal conductivity detector and automatic sampler (GC-TCD) - GC-TCD Nexis GC-2030 (Shimadzu)
A gas chromatograph with a thermal conductivity detector and an autosampler is used for the analysis of various analytes that have a different thermal conductivity from the carrier gas. The autosampler allows for a minimum sample injection volume of 0.2 µL and a maximum sample injection volume of 10.0 µL. The GC instrument has built-in electronic flow and pressure control of all connected gases.
Spectrophotometer – UV-1900i (Shimadzu)
The UV-1900i spectrophotometer has dual-beam optics covering the wavelength range between 190 nm and 1100 nm with a spectral width of 1 nm and a photometric range of up to 4 Abs. The noise detected at 700 nm is less than 0.00005 Abs. It has a built-in ultra-fast scan function that enables data collection at a speed of 29,000 nm/min.
Atomic Absorption Spectrometer with graphite furnace and automatic sampler (AAS) - AA-7000 (Shimadzu)
Atomic absorption spectroscopy is one of the most common spectroscopic analysis techniques used for the quantitative analysis of elements. The AA-7000 has a dual-beam optical system, with a wavelength range of 185 to 900 nm. Allows sampling from 2 to 90 µL and automatic flame optimization. The instrument has safety functions such as gas pressure control, automatic detection of fuel gas leaks, flame control and automatic flame extinguishing in the event of a power failure, as well as a vibration sensor. The graphite furnace (GFA-7000A) has temperature, gas flow control and automatic parameter optimization for each target element. This control plays a key role in all stages of analysis, including drying, ashing (decomposition), and atomization. It is equipped with two separate gas inlets – for inert gas and oxidizer. Temperature control enables operation in a wide temperature range, ranging from room temperature to 3000 °C. Allows up to 20 steps of temperature program settings. The software-controlled autosampler (ASC-7000) in the AA-7000 supports flame and graphite furnace (electrothermal) techniques and has a capacity of 60 samples. It has a built-in flushing mechanism to prevent contamination between two samples.
Microwave system for splits ETHOS LEAN and ETHOS EASY (Milestone)
Because microwave decomposition systems provide an efficient sample preparation method for analytical techniques such as atomic absorption spectroscopy (AAS), ICP-OES, and ICP-MS, microwave decomposition is one of the most commonly used sample preparation techniques. In microwave decomposition systems, solid samples (metals, food, soil, medicine and others) are completely decomposed at elevated temperature and pressure. Solid samples are (mostly) converted into liquids with the help of acids and oxidants. Decomposition time depends on the sample, but usually does not take more than 60 minutes. In our laboratory, we use a microwave acid decomposition system designed for closed-vessel decompositions, which allows the use of different combinations of acids and full control over several reaction parameters.
Grinder for sample homogenization – B-400 (Büchi)
The Büchi B-400 grinder is designed for efficient sample homogenization. It is useful for materials with a high water, fat and fiber content and is resistant to low temperatures when working with frozen samples. Grinding is performed using inert ceramic knives. It is used to prepare samples for further analysis.
Automatic Titrator – DL70 (Mettler Toledo)
By using an automatic titrator, the titration process is performed automatically, which allows for greater accuracy (repeatability and reproducibility) of titrations, while at the same time shortening the execution time and reducing the need for personnel to have technical skills in manual titration.
Laboratory rotavapor - Rotavapor® R-100 (Büchi)
A rotary evaporator is a device used in laboratories to efficiently evaporate solvents from samples. Evaporation of the solvent takes place with the help of a decrease in pressure, which causes a decrease in the boiling point of the solvent and its efficient evaporation at moderate temperatures. It is designed for reliable and flexible rotavaping that covers most needs in evaporation applications. Rotavapor® R-100 enables the rotation speed of the flask in the heating bath from 20 to 280 rpm, and it is also possible to control the temperature range from 20 to 95 °C.
Time-of-Flight Secondary Ion Mass Spectrometry (ToF-SIMS MS/MS) – IONTOF M6
Time-of-flight secondary ion mass spectrometry (ToF-SIMS) is a surface analysis technique used to measure mass spectra on the surface of solids. The spectrometer enables high-resolution analysis of the elemental and molecular composition of surfaces. It enables high mass resolution, high spatial resolution and depth profiling with a dual ion beam source, for both conductive and insulating materials. The use of different ion sources enables the analysis of inorganic and organic materials (the latter especially in combination with GCIB), where high mass resolution spectra can also be measured for lighter elements such as hydrogen, nitrogen and oxygen. It also enables obtaining a surface image (imaging) with a high spatial resolution (
X-ray photoelectron spectroscopy XPS (Kratos Supra+)
X-ray photoelectron spectroscopy (XPS) is a surface analysis technique that allows determination of the elemental composition and environment of an element - its oxidation state and chemical bonds. Kratos Supra+ enables automatic angle-resolved measurements, sample heating and cooling, and depth profiling of organic substances with GCIB (gas cluster ion beam) technology and depth profiling of inorganic substances with monatomic Ar+.
Profilometer DektaXT (Bruker)
A contact profilometer is an instrument that allows determining the profile of a sample by sliding a diamond tip over the surface and recording the deviation from the reference plane of the sample. In this way, we obtain data on the roughness of the surface, the 3D profile of the surface and also the thickness of the surface layer. The device is used to examine various types of solid materials with a surface area of up to 10 cm in the x-direction and up to 10 cm in the y-direction. The latter complements atomic force microscopy (AFM) measurements, where we are limited to 120 micrometers in the x-direction and 120 microns in the y-direction. Compared to AFM, the profilometer allows determining the topography of samples with a much larger height difference, but its spatial resolution (compared to the AFM instrument) is lower. The DektakXT profilometer from Bruker is equipped with 2 µm, 5 µm and 12 µm diameter tips.
Gas chromatograph with mass selective detector and flame ionization detector (GC-MS) - GC-MS, GCMS-QP2020 NX (Shimadzu)
Gas chromatography with mass spectrometry (GC-MS) enables the analysis of various samples. In the column, the sample is separated into different components, whereby the components are eluted from the column after a certain time. It is equipped with a mass selective (MS) detector and a flame ionization detector (FID). The introduction of the sample into the gas chromatograph can be carried out using the headspace sampling technique, injection of liquid samples or solid phase microextraction (SPME). The instrument is equipped with an automatic sampler capable of analyzing 162 liquid and 45 gaseous samples. He has two English. split/splitless injector, one for the MS-system and the other for the FID-system, which enables the simultaneous installation of two chromatographic columns.
Ion chromatograph (IC) - HIC-ESP (Shimadzu)
Ion chromatography (IC) is used to determine cations and anions. Based on the interactions of the charged particles of the analyte with the oppositely charged functional groups of the stationary phase, different ions can be separated. The IC consists of an autosampler, an oven, a solvent feed pump, a suppressor, a degasser, and a detector. The use of an autosampler enables very fast injection, the inert pump system optimizes solvent delivery control, and the suppressor reduces the background signal from the eluent.
RIUM - UM na zemljevidu institucij z opremo za najnaprednejšo površinsko analizo
RIUM - X-žarkovna fotoelektronska spektroskopija
Mariborski raziskovalci razvijajo inovativne bioaktivne prevleke za ortopedske vsadke
WELCOME TO THE STUDY OF CHEMISTRY AND CHEMICAL ENGINEERING
Study programs of the FKKT of the University of Maribor
Freshman, welcome to the Faculty of Chemistry and Chemical Engineering!
WHERE TO FIND US
Tutors group: https://www.facebook.com/groups/166237513386326/
Athletes group: https://www.facebook.com/groups/572838746098295/
TPO & AED
TPO and AD: This video demonstrates basic resuscitation procedures and the use of an automated electrical defibrillatorPRESENTATION FCCE
STUDENT AFFAIRS OFFICE - office hours and contacts
DICTIONARY OF CHEMISTRY
Lecture room A-107
Chemist and chemical engineer
Eat Smart Restaurant
WELCOME TO STUDY CHEMISTRY AND CHEMICAL ENGINEERING
LABORATORY OF SEPARATION PROCESSES AND PRODUCT DESIGN
RIUM - UM na zemljevidu institucij z opremo za najnaprednejšo površinsko analizo
RIUM - X-žarkovna fotoelektronska spektroskopija
Mariborski raziskovalci razvijajo inovativne bioaktivne prevleke za ortopedske vsadke